The CYY-W600 Wall-Mounted Molten Metal Temperature Meter is a fixed, wired temperature measurement instrument designed for foundries, melting furnaces and metal casting workshops.
The CYY-W600 is particularly suitable when operators and production supervisors need to observe the molten metal temperature from a distance.
It can be used for:
Molten iron temperature measurement
Molten steel temperature measurement
Molten copper temperature measurement
Furnace temperature measurement
Foundry temperature measurement
Ladle temperature checking
Pre-pouring temperature measurement
Induction furnace temperature measurement
The CYY-W600 is designed to be installed at a fixed location rather than carried by the operator.
The large display can be mounted on a suitable wall near the furnace, while the measuring gun and thermocouple are used at the actual molten-metal measurement point.
The recommended installation arrangement in the operating manual is approximately:
Measurement point → Measuring gun → Wired connection → CYY-W600 large display
The display is generally installed within approximately 10 meters of the measurement point in a direct viewing line, at an installation height of approximately 2–4 meters.
This arrangement is useful when temperature results need to be visible to furnace operators, supervisors or other production personnel.
The CYY-W600 uses a 5-inch large digital display.
The displayed digits are approximately 120 mm high and 66 mm wide, providing significantly greater visual size than a conventional handheld temperature meter.
The large display is especially useful in:
Large foundry workshops
Noisy production areas
High-temperature furnace areas
Induction furnace operations
Areas where operators cannot stand close to the display
Production lines where multiple workers need to see the result
The purpose is simple: measure at the furnace and display the temperature where people can easily see it.
For iron foundries, CYY-W600 can be configured as a molten iron temperature meter.
It can be used for temperature checking during:
Iron melting
Furnace operation
Ladle transfer
Pre-pouring inspection
Casting preparation
Production process control
The CYY-W600 can also be used as a molten steel temperature meter.
The CYY-W600 can be configured for molten copper temperature measurement.
For copper melting operations, the large wall-mounted display allows the temperature result to remain visible in the workshop after the measurement.
For aluminum and other lower-temperature molten metals, the correct thermocouple configuration should be selected according to the actual process temperature.
The CYY-W600 is supplied according to the specified material and required measurement range.
When ordering, customers should provide information about the material being measured and the required temperature range so that the appropriate configuration can be prepared.
The CYY-W600 is suitable for furnace-front temperature measurement.
The measuring gun is positioned at the furnace or molten-metal container, while the large display is mounted at a convenient viewing location.
This allows the operator to perform the measurement without having to hold a handheld display in front of the furnace.
The system is therefore suitable for:
Furnace → Molten Metal → Thermocouple → Measuring Gun → CYY-W600 → Large Digital Display
This simple structure can be particularly useful in small and medium-sized foundries looking for a practical fixed temperature measurement system.
The CYY-W600 uses a wired connection between the measuring gun and the display instrument.
The measuring gun is connected through an aviation connector, and compatible measuring lances are available in approximately 1.6–3.3 m lengths.
Compared with a wireless system, a wired configuration provides a straightforward connection without requiring a wireless receiver or communication setup.
For foundries that already have a fixed furnace measurement area, this can be a practical solution.
The CYY-W600 is designed for demanding melting environments and incorporates anti-interference measures.
According to the product documentation, the instrument can perform temperature measurement while an intermediate-frequency furnace is energized without requiring the furnace to be switched off.
The CYY-W600 processes the temperature signal digitally.
During a typical molten-metal measurement, the temperature may rise rapidly, pass through an overshoot and then stabilize.
The instrument automatically analyzes this temperature process, calculates the stable temperature value and displays and holds the result.
An audible bell indicates when the operator should complete the measurement and remove the measuring gun.
This function helps reduce dependence on manual observation of the temperature curve.
During normal operation, the thermocouple is inserted into the molten metal to a depth of at least 20 mm.
The measurement time is approximately 3–5 seconds.
When the electric bell sounds, the measuring gun should be removed immediately. The CYY-W600 automatically displays and holds the measured temperature.
| Technical Parameter | CYY-W600 |
|---|---|
| Product Type | Wall-Mounted Molten Metal Temperature Meter |
| Installation | Wall-mounted |
| Measurement Connection | Wired |
| Display Type | Large digital display |
| Display Size | 5 inches |
| Digit Height | Approx. 120 mm |
| Digit Width | Approx. 66 mm |
| Resolution | 1°C |
| Response Time | 1 second |
| Power Supply | AC220V ±10% |
| Instrument Size | Approx. 500 × 250 × 100 mm |
| Operating Temperature | 0–50°C |
| Operating Humidity | 5–80% RH |
| Storage Temperature | -20–60°C |
| Storage Humidity | 5–90% RH |
| Measuring Gun Length | Approx. 2.5 m |
| Maximum Listed Measurement Range | Up to 2007°C depending on thermocouple |
A fixed large-display system can be advantageous when the temperature needs to be visible to more than one person.
Compared with a small handheld display, CYY-W600 provides:
Large numbers
The approximately 120 mm-high digits are easier to see from a distance.
Fixed installation
The display remains in a defined position near the furnace.
Wired connection
The measuring gun connects directly to the instrument without requiring wireless communication.
Automatic temperature hold
The measured temperature remains displayed after the measuring gun is removed.
Audible completion signal
The electric bell indicates when the measurement is complete.
The CYY-W600 can be used in:
For molten iron temperature checking during melting and before pouring.
For high-temperature molten steel measurement.
For molten copper temperature monitoring.
For furnace and ladle temperature checks.
For measuring molten metal temperature while the furnace is operating.
The large display allows supervisors and operators to see the temperature result from a distance.
The manufacturer specifically describes the large-screen design as useful for monitoring on-site worker operation and supporting internal production management.
The CYY-W600 can be described using several industry terms depending on the customer's search habits:
Large display molten metal pyrometer
Large screen pyrometer
Wall-mounted molten metal temperature meter
Furnace temperature meter
Foundry temperature measurement instrument
CYY-W600 is a wall-mounted large-display molten metal temperature measurement instrument for foundries and melting applications.
Yes. It can be described as a large display molten metal pyrometer or large screen furnace pyrometer in international industrial terminology.
Yes.
Yes.
Yes.
The instrument uses a 5-inch digital display with approximately 120 mm-high digits. The installation instructions recommend approximately 10 m direct viewing distance from the measurement point under suitable workshop conditions.
Yes. CYY-W600 is designed as a wall-mounted large-display temperature measurement instrument.
The CYY-W600 described here is a wired system. The measuring gun is connected directly to the large display instrument.
The technical documentation specifies AC220V ±10% power supply.
The CYY-W600 Wall-Mounted Molten Metal Temperature Meter is designed for foundries and metal melting plants that need a clear and practical way to measure and display molten metal temperature at the furnace.
With its large 5-inch digital display, approximately 120 mm-high digits, wired measuring gun, automatic temperature calculation and hold function, audible completion signal and multiple thermocouple configurations, CYY-W600 can be used for molten iron, molten steel, molten copper and other compatible molten-metal temperature measurement applications.
For customers looking for a wall-mounted furnace temperature meter, large digital pyrometer, molten iron temperature meter, molten steel temperature meter or foundry temperature measurement instrument, CYY-W600 provides a fixed large-display solution for the melting and casting shop floor.