CYY-W600 Large Display Molten Metal Pyrometer | Foundry Furnace Temperature Meter
8.pyrometers高温计
CYY-W600 Large Display Molten Metal Pyrometer | Foundry Furnace Temperature Meter
☏ 产品咨询<
The CYY-W600 Large Display Molten Metal Pyrometer is a fixed, wall-mounted temperature measurement instrument designed for foundries, metal melting shops and metallurgical applications where molten metal temperature needs to be measured quickly and clearly at the furnace.
Unlike a small handheld thermometer, the CYY-W600 uses a 5-inch large digital display with approximately 120 mm high digits, allowing the measured temperature to be read from a distance. This makes it particularly suitable for furnace-side temperature measurement where operators need to see the result while standing away from the measurement point.
The CYY-W600 can be configured for different molten metals and temperature ranges by using compatible rapid thermocouple probes.
It can be used as a:
Large display molten metal pyrometer
Large screen furnace pyrometer
Foundry temperature meter
Molten metal temperature meter
Digital molten metal thermometer
Large display temperature measurement instrument
Furnace-side temperature measurement system
One of the main advantages of the CYY-W600 is its highly visible display.
The instrument uses a 5-inch large digital display, with digits approximately 120 mm high and 66 mm wide. The design is intended for long-distance viewing in a foundry or melting workshop.
The display can normally be installed approximately 10 meters from the measurement point in a direct line of sight, while an installation height of approximately 2–4 meters is recommended according to the operating manual.
This makes the CYY-W600 particularly useful when:
The operator needs to read temperature from a distance
The furnace area is hot or difficult to approach
Several workers need to see the temperature
Temperature readings need to be observed during melting
A large digital display is preferred instead of a small handheld display
In international foundry terminology, molten metal temperature measurement is commonly described using terms such as molten metal temperature measurement, pyrometer, temperature measurement instrument, melting and casting temperature measurement.
The CYY-W600 is designed for the same general application category, but with a large fixed display and wired measuring connection for furnace-side operation.
The CYY-W600 can be configured for molten iron temperature measurement using suitable rapid thermocouples.
This makes it suitable for:
Gray iron foundries
Ductile iron foundries
General cast iron production
Iron melting furnaces
Induction melting furnaces
Ladle temperature checking
Pre-pouring temperature measurement
The instrument can display the temperature clearly while the operator performs the measurement at the furnace or ladle.
For iron foundries, a large display can also make the measured temperature easier for supervisors and production personnel to observe.
The CYY-W600 can also be configured for molten steel temperature measurement.
The CYY-W600 can also be configured for molten copper temperature measurement.
The product documentation lists suitable Pt-Rh and CYY thermocouple configurations for molten copper applications.
For copper melting workshops, the large digital display allows the operator to check the measured temperature without having to stand close to a small instrument display.
For lower-temperature non-ferrous metal applications, the appropriate thermocouple configuration should be selected according to the required measurement range.
Customers should specify the metal material and required temperature range when ordering the CYY-W600 so that the instrument and measuring probe can be configured correctly.
The manufacturer specifically requests customers to specify the material being measured and the required temperature range when ordering.
The CYY-W600 is designed as a wall-mounted molten metal temperature measurement instrument.
The large display can be mounted on a wall at a suitable viewing position near the furnace.
Recommended installation conditions from the operating instructions include:
Approximately 10 m direct viewing distance from the measurement point
Installation height approximately 2–4 m
Wall installation away from excessive furnace heat where practical
Reliable grounded AC220V power supply
This configuration allows the temperature display to remain visible while the measuring operator works at the furnace.
The CYY-W600 uses a wired connection between the large display instrument and the measuring gun.
The measuring gun is connected through the instrument's aviation connector, and the measuring lance is available in approximately 2.5–3.3 m configurations.
For foundries that prefer a simple wired system without wireless communication, this provides a straightforward installation and operation method.
The CYY-W600 Its internal processing system automatically handles the typical molten-metal temperature curve, including rapid temperature increase, overshoot and stabilization.
The instrument calculates the stable temperature value automatically and displays and holds the result. When the measurement is completed, the electric bell provides an audible indication to the operator.
This helps make the measurement process easier to operate in a busy foundry environment.
During measurement, the thermocouple is inserted into the molten metal to a recommended depth of at least 20 mm.
The normal measurement time specified in the manual is approximately 2–5 seconds.
When the bell sounds, the operator should immediately remove the measuring gun. The CYY-W600 then automatically displays and holds the measured temperature.
The CYY-W600 is designed with anti-interference measures for demanding melting environments.
According to the product documentation, the instrument can perform temperature measurement in an intermediate-frequency induction furnace while the furnace is energized, without requiring the furnace power to be switched off.
This feature is especially relevant for foundries using induction furnaces for iron, steel and other metals.
| Item | CYY-W600 Specification |
|---|---|
| Product Type | Large Display Molten Metal Pyrometer |
| Installation | Wall-mounted |
| Connection | Wired |
| Display | 5-inch large digital display |
| Digit Height | Approx. 120 mm |
| Digit Width | Approx. 66 mm |
| Resolution | 1°C |
| Response Time | 1 second |
| Power Supply | AC220V ±10% |
| Display Size | Approx. 50 × 25 × 10 cm |
| Operating Temperature | 0–50°C |
| Operating Humidity | 5–80% RH |
| Storage Temperature | -20–60°C |
| Storage Humidity | 5–90% RH |
| Measuring Lance | Approx. 2.5 m |
| Maximum Listed Range | Up to 2007°C depending on thermocouple |
The technical documentation specifies 1°C resolution, approximately 1-second response time, AC220V ±10% power supply and a large-display housing size of approximately 50 × 27 × 10 cm.
A conventional handheld temperature meter is useful when only the operator needs to see the measurement.
A large-display pyrometer is more useful when the temperature needs to be visible to multiple people in the production area.
The CYY-W600 can help:
Make temperature readings easier to see
Reduce the need to approach a small display
Allow supervisors to monitor furnace temperature
Improve visibility at the furnace
Support routine process temperature control
Provide a simple fixed measurement point
Work with multiple rapid thermocouple configurations
The product documentation also notes that the large-screen design can help monitor on-site operator operation and strengthen internal production management.
The CYY-W600 can be used for:
Iron Foundry
Molten iron temperature measurement in melting furnaces and before pouring.
Steel Foundry
Copper Melting
Metal Casting
Furnace and ladle temperature checking during casting operations.
Induction Furnace
Temperature measurement during energized induction melting operations.
A large display pyrometer is a high-temperature measurement instrument designed to display molten-metal temperature in large, highly visible digital numbers. The CYY-W600 uses a 5-inch display with approximately 120 mm high digits.
Yes.
Yes.
Yes.
No. The CYY-W600 is a wired, wall-mounted large-display temperature measurement instrument. The manufacturer's product family also includes wireless versions, but the CYY-W600 configuration described here is wired.
The installation instructions recommend positioning the large display at approximately 10 meters from the measurement point within a direct line of sight, depending on the actual workshop conditions（5m-20m）.
The CYY-W600 Large Display Molten Metal Pyrometer is designed for foundries and metal melting plants that require clear, easy-to-read molten metal temperature measurement at the furnace.
Its large 5-inch digital display, wall-mounted installation, wired measuring system, automatic temperature hold, audible measurement-completion signal and multiple thermocouple options make it suitable for molten iron, molten steel, copper and other compatible metal temperature measurement applications.
For customers looking for a large screen pyrometer, large display molten metal thermometer, furnace pyrometer or foundry temperature measurement instrument, CYY-W600 provides a practical fixed-display solution for the melting and casting shop floor.